Instructions for the use of inflatable products
First, function introduction.
1. Safety: the equipment is more secure in designing useful materials than other types of products.
2. How to play: this product changes the passive play of other kinds of products, such as sitting, slippery, turning and so on. Children can play their imagination and play creatively.
3. Durable: the product can generally be used for three to five years and can be played for 100000 people.
4. Convenience: the equipment is large and small, can be combined arbitrarily according to the site, and the volume is small after deflation and folding, and the transportation is convenient.
II. Conditions of use.
1. Weather conditions: the operation of this toy is prohibited when the outdoor wind is higher than level 3; in the weather of thunder, lightning, rain and snow, it is forbidden to operate this toy outdoors; when the light is weak at night, it is forbidden to operate this toy.
2. Ground conditions: the ground is flat, free of sharp objects and other sundries.
The ground is laid with textile cloth and so on.
3. Fan protection: the protective cover is tight on the outside of the fan to prevent children from touching it.
4. Power supply conditions: the power outlet should be placed out of the reach of children, and the power cord should be safe to make up for the damage and leakage.
5. Fasten the Fangfeng D ring around the toy to the ground.
3. Operation and management.
1. Toy inflation: the toy can quickly reach the operating conditions within 8 minutes after being connected to the power supply. If it does not bulge for a long time, or for a bad time, the following checks should be made: 1) stop the power supply to check whether the fan is upside down; 2) check whether the exhaust port is sealed.
2. Operating instructions: this product is suitable for children aged 3-16 to play.
This product is only for children under 60KG weight.
When there are too many people, children under 3 years old are not allowed to play, and frail children refuse to play.
When the density of toy personnel exceeds 0.6 people per square meter, stop selling tickets; each device application ensures that 2-3 managers guide and manage children.
3. Safety warnings and precautions:
Safety warning: refers to the injury that may be caused to children in the course of business.
Note: parents are strictly forbidden to help their children sit, ride, lie down and lean on the guardrail; when there are many tourists, they should send a manager to guide them; it is forbidden to eat all kinds of food on toys; it is forbidden to chase and fight on toys; in case of a sudden power outage, parents should assist managers to guide children to evacuate quickly and check whether there are children stranded on toys; it is strictly forbidden for children to use body impact guardrail.
Children are strictly prohibited from jumping from height or from toys to the ground.
4. Operation and management requirements: if toys are found abnormal in operation, they should be inspected and eliminated in time. The purpose of operation is to keep toys clean and create a hygienic environment for children.
The management is to pay attention to check the sound and temperature rise of the fan, and guide children to play according to the correct play method, so as not to cause injury.
Fourth, common failures and troubleshooting:
1. Paste requirements: first, apply glue to the place where the toy should be glued and on the cloth, then hang it for half a minute, stick the cloth to the adhesive place, flatten the edge and finish the paste.
2. The toy is scratched: the cut is longer than 5CM and sewn with needle and thread, and then pasted with cloth strips or cloth samples.
The cut is shorter than 5CM and can be pasted directly.
3, seam opening thread: first sew the opening flat with needle and thread, (or take apart and sew it from the bottom of the air cushion) you can paste the opening firmly and consider beauty at the same time.
4. Beautify the warped edge: smear an appropriate amount of glue on the warped edge with a small brush, then press and paste firmly.
5. Degumming: some parts that are easy to wear are easy to be degummed after being used for a long time. Cloth can be cut into different shapes and pasted at the degumming place.
6. Large air leakage: after the toy has been used for a long time, due to the enlargement of the pinhole seam in some parts, the air leakage can be greatly increased, so you can consider pasting the cloth at the seam to reduce the air leakage. if the toy is too old, it should be scrapped to prevent problems in the operation.
7. Local abnormal bulge of the air cushion: in general, the rib is torn apart from the air cushion, the bottom of the air cushion can be taken apart along the seam, connect the rib with the air cushion with needle and thread, and then stick with a strip of cloth to protect the suture.
Chat Now
ChatNow