Common problems and repair methods of Children s inflatable castle

Everyone knows that even the best things cannot stand the baptism of time, and the same is true of children‘s inflatable castles.

In the process of running a children‘s inflatable castle, it will more or less cause wear and tear.

U-Rides attraction are here to teach you how to solve common problems in the use of children‘s inflatable castles and how to repair them.

The biggest doubt about children‘s inflatable castles is that children‘s inflatable castles can be used for a long time.

Common inflatable castle cloth for professional inflatable cloth, cold resistance and flame retardancy are better, PVC can mainly prevent deformation, the role of reinforcement, the general number of inflatable castle users in about 7-100000 people, generally no problem for 3-5 years.

Anyone who has run a children‘s inflatable castle knows that the inflatable castle needs to be used with matching fans.

The common fans on the market are 950W, 1100W, 1500W, generally using 1.5hp blowers (generally 220V), the specific situation can be determined according to the area of the inflatable castle, or consult the manufacturer.

In addition, the fan stops rotating when there is a sudden power outage in the business process, but the air has a process of circulation, so there is no need to worry that the child will fall and get hurt.

Cut off the power and exit the inflatable castle in an orderly manner.

Finally, there is the repair of the inflatable castle.

The basic method of repair is to use the excess cloth given by the manufacturer, evenly apply glue (note that it cannot be too corrosive glue), paste the cloth to the damaged place, and do not bend the edge after flattening (sewing with needle and thread is also possible).

Then inflate continuously to detect whether the air is leaking.

If there is large area damage, the manufacturer needs professional maintenance.

When the children‘s inflatable castle is used, the air cushion will appear local abnormal bulge.

In general, the ribs are torn apart from the starting point, and the bottom of the starting point can be taken apart along the seam, connect the reinforcement with the air cushion with needle and thread, and then paste with a strip of cloth to protect the suture.

For children‘s inflatable castle U-Rides Attraction has more than ten years of production research experience, high quality products, best-selling at home and abroad.

Just visit U-Rides Attraction website:www.U-Rides.com and get in touch today!